Sign In | Join Free | My himfr.com
Home > WECO Door Sensor >

3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation

NINGBO WECO OPTOELECTRONICS CO., LTD.
Contact Now
    Buy cheap 3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation from wholesalers
     
    Buy cheap 3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation from wholesalers
    • Buy cheap 3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation from wholesalers

    3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation

    Ask Lasest Price
    Brand Name : WECO
    Model Number : WECO-917MD-3D
    Certification : CE CSA
    Price : Negotiable
    Payment Terms : T/T, Western Union, MoneyGram
    Supply Ability : 1200000SETS/Year
    Delivery Time : 15Workdays
    • Product Details
    • Company Profile

    3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation

    3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation

    Ningbo WECO Optoelectronics CO., LTD. developed to produce WECO Brand elevator door detector since 1998. WECO-917MD-3D is an upgrade model compare to parted 3D sensor, which is applied to high-end occasions.

    Advantages
    3D protection, detected to the stereoscopic area
    Easy Installation, same as common products.


    Features

    Technical FeatureWECO-917MD-3DWECO-957MD-3D
    Number of Infra Red Diodes32 Diodes
    Response TimeRelay output61ms
    Transistor output37ms
    Sacanning Beams154-94 beams
    Detecting Height20~1840mm
    2D detecting Range0~4m
    Light Immunity100000Luxsunlightproof
    Operation Temperature-20℃-+65℃
    Protection LevelIP54
    EN12015, EN12016General Circuit Level
    Voice Reminderafter continuous detection for 15s, buzzer ON.
    LED Interpretation1. Yellow LED and Red LED in Receiver on when blocked or in malfunction.
    2. Yellow LED in receiver on and Red LED in receiver off without blocking.



    Installation dimension



    LED Indicator Function


    Installation
    1. The door detector should be installed on both side of car door, as close to the forward edge of the car door in order to prevent the infrared being obstructed by the landing door and shoot out with the angel of 45°.

    2. During the installation make sure the two sides are in a same hotizontal up and down. Power ON after installation.
    3. Ensure there are no obstalces in front of the landing door, make a round closing and opening several times by manual operating and observe if the process goes smoothly.

    4. Keep the elevator in the same leveling position. Do 3D self- learning configuration. Two sensitive range for your choices.

    5. Factory reset: ( only do this step if you want to back to factory setting, otherwise go to step 6). Power off the dorr detector, turn the switch 4 to ON, then power on the door detector, the device is entering the factory reset, wait 1s when hearing the buzzer beep, turn the switch 4 to OFF, door detector back to normal state.

    6. Normal running stute.
    Keep all switches to OFF, let the door detector back to normal state.






























    Quality 3D Protection Photocell Door Sensor Banner Safety Light Curtains Easy Installation for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: NINGBO WECO OPTOELECTRONICS CO., LTD.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)